High Power Fiber Optic In-line Polarizer 1030nm
Introduce
High-power fiber optic in-line polarizers at 1030nm 1040nm1064nm are used to transmit linearly polarized light while blocking the orthogonal polarization of unpolarized (or randomly polarized) light sources. They are used to attenuate orthogonally polarized light and have a high extinction ratio, the specific value depending on the specifications of each polarizer. They can also be used to enhance the extinction ratio of polarized signals. They are commonly used in fiber optic networks and measurement applications, including polarization analysis, polarization monitoring and control, polarization mode dispersion (PMD) monitoring, and improving polarization extinction ratio (PER). They are also ideally suited for use in polarization-maintaining fiber amplifiers, fiber lasers, and high-speed communication systems and instrumentation applications. We provide matching PM patch cords for use with these polarizers.
Specification
| Parameter | limit value | Typical value | unit |
| Center wavelength | 1030nm 、1040、1064 or customized | nm | |
| Bandwidth range | ±10 or customized | nm | |
| Insertion loss（Type) | 0.8 | dB | |
| Insertion loss | Max. | 1.3 | dB |
| Extinction ratio（Type) | 28 | dB | |
| Extinction ratio | Min. | 25 | dB |
| Return loss | Min. | 50 | dB |
| Power handling capacity | 1.3.5.10.20 | W | |
| Tensile load | Max. | 5 | N |
| Fiber type | PM 980 Panda Fiber or HI 1060 Fiber | ||
| Operating temperature | -5 to +50 | ℃ | |
| Storage temperature | -20 to +85 | ℃ |
Note:
* Due to technological improvements, packaging dimensions may be slightly adjusted. Please confirm details before placing your order if this is a concern.
* The above parameters do not include connector specifications. Standard parameters with connectors will have an additional 0.3dB loss, and the connector is only rated for 1W (CW) power.
* The Tap port uses multimode fiber and is used to extract excess light generated by high power.
Ordering Information:
| ILP-A-B-C-D-E | |
| A=wavelength | 1030nm, 1040nm,1064nmSS – Specify |
| B=Fiber type | 1= Input HI1060,Output PM980,2=Input and output PM980 3= Input and output HI1060 |
| C=Casing type | B=Bare fiber 9=900um loose tube |
| D=Fiber length | 05=0.5m 10=1.0m 50=5.0m SS=Specify |
| E=connector | FA=FC/APC FP=FC/UPC SA=SC/APC SP=SC/UPC SS=Specify |
| F=Power | 1W, 2W, 5W, 10W, 20W，SS=Specify |