High Power Fiber Optic In-line Polarizer

In-Line Fiber Optic Polarizers 780nm

Introduce

In-Line Fiber Optic Polarizers 780nm 790nm 810nm these devices are used to block orthogonally polarized light from unpolarized (or randomly polarized) light sources using linear polarization. They attenuate orthogonally polarized light and have a high extinction ratio, the specific value depending on the specifications of each polarizer. They can also be used to enhance the extinction ratio of polarized signals. They are commonly used in fiber optic networks and measurement applications, including polarization analysis, polarization monitoring and control, polarization mode dispersion (PMD) monitoring, and improving polarization extinction ratio (PER). They are also ideally suited for use in polarization-maintaining fiber amplifiers, fiber lasers, and high-speed communication systems and instrumentation applications. We offer matching PM patch cords for use with these devices.

Specification

Parameter limit value Typical value unit
Center wavelength   780、793、810  or customized nm
Bandwidth range   ±5 or customized nm
Insertion loss(Type)   0.8 dB
Insertion loss Max. 1.0 dB
Extinction ratio(Type)   28 dB
Extinction ratio Min. 25 dB
Return loss Min. 50 dB
Power handling capacity   100 (higher power available upon request) mW
Tensile load Max. 5 N
Fiber  type   PM 850 Panda Fiber or HI 780 Fiber  
Operating temperature   -5 to +50 ℃
Storage temperature   -20 to +85 ℃

Note: *The above parameters do not include connector losses; standard parameters including connectors will have an additional loss of 0.3 dB.

Ordering Information:

ILP-A-B-C-D-E
A=wavelength 780,793,808,810,820,SS – Specify
B=Fiber type  1= Input HI1060,Output PM980,2=Input and output PM980
3= Input and output HI1060
C=Casing type B=Bare fiber 9=900um loose tube  
D=Fiber  length 05=0.5m  10=1.0m 50=5.0m SS=Specify
E=connector   FA=FC/APC FP=FC/UPC SA=SC/APC SP=SC/UPC SS=Specify

 

Tags:

© Copyright 2026 | xionghua photonics | All Rights Reserved